The 7200 Monitor combines with the Partech range of Suspended Solids and Turbidity Sensors to give a cost-effective solution to measurement of Suspended Solids, Turbidity and Sludge Density. The Monitor provides a large character display of the measured value combined with a scrolling information bar showing the measurement status.
We offer a range of standard installation options, ranging from a simple handrail bracket to a package including an outer enclosure, isolator and handrail mounting struts.
The menu structure includes set up wizards that will guide the user through system configuration and routine calibration. The wizards will ensure quick, simple installation and easy maintenance without the need to refer to the instruction manual. The calibration routine incorporates a feature where the user can tell the instrument that a sample is being taken, wait for the result from the laboratory and then enter the value. The instrument will automatically be calibrated to the new result, in the time between taking the sample and entering the result the instrument will continue to operate on its previous calibration
Additional features include statistics for maximum and minimum values and password protection of the keypad to ensure that the system setting cannot be altered in error.
|Dimensions (hxwxd)||160 x 166 x 73 mm|
|Cable Entry||1x M20, 4x M16, 1x M12|
|Cable Core Size||Max Conductor Size 2.5 mm²|
|Power Supply||100 to 240 VAC 50/60 Hz|
or 9-30 VDC
|Power Rating||15 W|
|Operating/Storage Temperature||-20 to 60ºC, 0-95% Relative Humidity, Non-Condensing|
|Display||Graphical LCD, providing 4 1/2 digits with 2 message lines|
|Back Light||On/Off/On after Keypress with user adjustable contract|
|Membrane Keypad||6 Key, pillow embossed|
|Units of Measurement||mg/l, g/l, ppm, NTU, FTU, %SS, User Defined|
|Analogue||0/4-20 mA, maximum load 750 ohm|
|Relay Rating||Max 2A @ 30VDC/230VAC|
|Type||High, Low, Fault|
|167200||7200 Monitor (115/230 VAC Supply)|
|221258||7200 Monitor (12/24 VAC Supply)|
|224370||FlexTech Monitor Bracket (72000/8100/8200 Monitor, Ø 43 to 60.3mm)|
Inline Sensor for Sludge Density, Suspended Solids and Turbidity MonitoringMore Details
Self Cleaning Suspended Solids or Turbidity sensor designed for discharge and inlet monitoringMore Details