Call Menu

SludgeWatch 8200w² Monitor

The SludgeWatch 8200w² Monitor provides a reliable method of detecting the sludge blanket level in clarifiers and settlement tanks, or increasing levels of suspended solids or sludge density in large range of processes.

Control of the sludge blanket level is essential to ensure discharge consent compliance and efficient control of the treatment process. If the sludge blanket in a settlement tank is allowed to rise close to the surface there is a danger that solids will leave the tank and contaminate the next process stage or be discharged into the water course. Alternatively, if the sludge blanket is not allowed to stabilise or form a blanket or is pumped out too frequently the settlement process does not take place at all and solids will remain in suspension. Additionally there is a danger that thin sludge or water will be pumped from the bottom of the tank into the sludge handling system thus reducing the effectiveness of that process.

For specialist advice call:

+44 (0)1726 879800

Online Enquiry
View Related Product Documents
  • Overview
  • General Specification
  • Sensor Selection
  • Ordering Infomation

The SludgeWatch 8200w² Monitor is suitable for mounting outdoors on the bridge of settlement tanks, as the enclosure is IP65 rated and no outer enclosure is required. Provision must be made for transmission of the output signal to the control system; this is normally possible via spare slip rings. Where this is not possible a radio telemetry option is available, allowing transmission directly to the control system without the need for installation of cables.

Physical
Dimensions (hxwxd)185 x 213 x 95 mm
Weight1.4 kg
Enclosure MaterialPolycarbonate
Cable Entries1 x M20, 4 x M16, 1 x USB Type A
Cable Core SizeMax Conductor Cross Section 2.5 mm²
Electrical
Power Supply85 to 264VAC 50/60 Hz
9 to 36VDC
Power Rating0.8A
Environmental Data
LocationIndoor/Outdoor
User Interface
DisplaySunlight Readable Black on White Graphic LCD
Output Signals
Analogue Output2 x 0/4-20mA
Relays3 x SPCO
Sensor Ranges
SoliTechw² IR 0-200Range: 0-200 mg/l
Optical Path: 100 mm
Special Application Only
SoliTechw² IR 0-1,500Range: 0-1,500 mg/l
Optical Path: 40 mm
Wastewater Treatment - Final Settlement and Humus Tanks
Drinking Water Treatment - Clarifers
SoliTechw² IR 0-10,000Range: 0-10,000 mg/l
Optical Path: 15 mm
Wastewater Treatment - Primary Settlement Tanks
Drinking Water Treatment - Picket Fence Thickeners
SoliTechw² IR 0-30,000Range: 0-30,000 mg/l
Optical Path: 8 mm
Wastewater Treatment - Picket Fence Thickeners
Part NumberDescription
229623SludgWatch 8200w² Fixed Sludge Level Detector (85 to 264VAC, Modbus Slave, 3 x Relay Outputs)
229624SludgeWatch 8200w² Fixed Sludge Level Detector (9 to 36VDC, Modbus Slave, 3 x Relay Outputs)

ASLD2200

ASLD2200 Sludge Blanket Monitor

The ASLD2200 is a fully automatic sludge blanket level detector designed for the water and waste water industry

More Details

SludgeWatch 715 Sludge Blanket Detector

The SludgeWatch 715 provides a simple, low cost method of spot checking the sludge blanket level in a wide variety of settlement tanks

More Details
SludgeWatch Ultra Monitor

SludgeWatch Ultra Sludge Blanket Monitor

Highly sophisticated Sludge Blanket Monitor using an ultrasonic transducer to track the sludge blanket interface

More Details